0 Items in basket

Download Adobe

View prices in:

Pounds Dollars Euros

Conservatory Vent Controllers

EL-VC-AVC002S+ (Vent Controller System + Keyfob)

Add item to basket
Tell a friend Back

WAS £335.86

NOW £254.95 (exc VAT)

This is a complete system that combines an Automatic Vent Controller AVC002C, Rain Sensor AVC002R, Remote Control Keyfob EL-VC-TX1 with an actuator/motor (AVC002M) and small swivel bracket set (AVC002B2) for top hung windows to provide a fully automatic conservatory temperature control system. One simple dial selects the target temperature in degrees Celsius.


The controller adjusts the heat in a conservatory like a wall thermostat in a central heating system, except with direct solar heating it controls the roof vents to lower the temperature to that set on the controller. If it gets too hot, the vents are opened, if it then gets too cold, the vents are closed. Up to eight EL-VC-AVC002M actuators can be controlled by EL-VC-AVC002C vent Controller. The case size is 148 x 88 (the same as a normal standard UK twin socket, so can be fitted flush or surface mount) and 52mm deep excluding thermostat setting knob. Colour: white, labelling black.


By including an EL-VC-AVC002R Rain Sensor, the system will continually monitor for the first drop of rain and take immediate action to give protection against unexpected wet weather. The automatic control will be over-ridden, when it is raining outside, whether the vents were previously opened automatically or even if opened manually. If the vents are open when it starts raining, they will be automatically closed, and held closed until it becomes dry again, then the vents will open automatically if required to maintain the set temperature. The rain sensor is easily mounted, typically on the sloping roof, using a permanent self-adhesive fixing (no drilling or preparation required).

The Rain Sensor is a small discrete white unit 28 x 51 x 75mm (excluding cable entry gland).


The Remote Control Keyfob (EL-VC-TX1) is designed to operate with Vent Controller EL-VC-AVC002C+ only. It allows remote manual operation of the vent: pressing button "A" on the keyfob opens the vent, while button "B" closes the vent. The remote Keyfob is a small black unit 60 x 40 x 15mm.

Our standard roof vent actuator/motor (EL-VC-AVC002M) is the popular industry standard ACK42 chain motor in white colour 230VAC (50Hz) double insulated so no earth wire is required. Suitable for top, bottom, side hung and roof vents. Centre push stainless steel chain with adjustable stroke from 100-400mm.$0$0The case size is 288.5x83x47.5mm, 1.9Kg and supplied with small swivel bracket set for top hung windows (other brackets and colour available as optional extra).


Although EL-VC-AVC002C incorporates manual vent controls, additional stand-alone EL-VC-AVS001 manual controls can optionally be added to offer manual control from alternative locations.